Model of a Carriage for a 30-Pounder Carronade, Model of a sliding gate for a 30-pound carronade with baking iron and leveling wedge. The body consists of two longitudinal beams with fittings and rings, located on two heavy cross beams. The longitudinal beams are rounded at the front, on top the ears with tapas are fitted on the front and behind the fitting with the track for the elving screw. In the middle two slats are arranged obliquely over the beams, between which an asymmetrical adjusting wedge runs. The cross beams protrude outside the longitudinal beams for extra stability and stand on friction blocks to limit the recule. Two small rollers on a hinge against the rear can raise the rear of the spout with the help of the baking iron, the front then also rests on two wooden rollers, which are arranged in front of the front crossbar, and can therefore easily be rolled on board. Scale 1: 5 (derived)., Rijkswerf Hellevoetsluis, 1854, wood (plant material), brass (alloy), h 10.5 cm × w 28 cm × d 16.5 cm × h 15 cm w 395 cm × d 27 cm
Keywords:
Model, Carriage, 30-Pounder Carronade, sliding gate, 30-pound carronade, baking iron, leveling wedge, body consists, two longitudinal beams, fittings, rings, located, two heavy cross beams, longitudinal beams, rounded, front, top, ears, tapas, fitted, fitting, track, elving screw, middle two slats, arranged obliquely, beams, asymmetrical adjusting wedge runs, cross beams protrude outside, extra stability, stand, friction blocks, limit, recule, Two small rollers, hinge, rear, raise, spout, help, rests, two wooden rollers, arranged, front crossbar, easily, rolled, board, Scale 1, 5, derived, Rijkswerf Hellevoetsluis, 1854, wood, plant material, brass, alloy
Image ID:
The watermark in the image will not appear on the final download.