Model of a Carronade on a Slide, Model of a carronade on sliding carriage on a floorboard representing a part of a ship's deck. The carronade has a caliber of 21 (16.6) mm and is 29 cm long. The barrel has a closing elevation with a visor, a visor on the taping band and a visor on the front band, a refraction ring and a feather screw through the grape, the eleveerschroef is covered with a rain cap. The upper carriage has a light trapezoidal body with brass fittings and rings, the front and back are rounded. Against the back the box in brass fitting, on top a brass plate to support the elving screw and at the front the ears through which the tapas runs, the vertebral bolt runs between the supports of the lower carriage. The lower carriage consists of a wooden frame with brass fittings, which tapers slightly forward and is rounded off at the front. Calves are installed in the middle and behind, with wheels attached, the rear wheels can swing. A box is fitted at the rear of the frame. The floorboard represents a part of an upper deck with pot lid, the lower carriage can be placed in the gate threshold with a spindle bolt at three different positions. There is a servant on both sides of the gate, to which the talies are attached. The parapet, probably cage parapet, is missing., anonymous, Netherlands (possibly), 1785 - 1795, wood (plant material), brass (alloy), rope, h 16.2 cm × w 35.5 cm × d 22.7 cm

Keywords: