Model of the Lock for the Basin at Flushing, Construction model of a lock with three pairs of doors for a dock. The model shows the improvements and repairs to the lock floor that were carried out in 1847-1848. The lock gates are operated by tall trees on capstans on shore, so-called push presses. The flood doors on the sea side of the lock open to the outside, they have no spouts. The remaining two pairs of doors are ebony doors and open inwards, the middle pair has low drains, the inner pair has drains just below the low water level. An elevated threshold is provided between the flood doors and the middle ebb doors as well as on the lock side of the inner ebb doors. On both sides of the lock a corridor runs just above the low water level from the outer harbor to the dock, these corridors have two underground doors that are operated with capstans upstairs. The middle doors are drain locks and serve to keep the harbor at depth together with the underground passages or 'sewers' by draining. 1:50 scale (scale on model), Flushing, Rijkswerf Vlissingen, 1849, wood (plant material), brass (alloy), rope, h 31 cm × w 149.2 cm × d 93 cm
Keywords:
Model, Lock, Basin, Flushing, Construction model, lock, three pairs, doors, dock, model, improvements, repairs, lock floor, carried out, 1847-1848, lock gates, operated, tall trees, capstans, shore, push presses, flood doors, sea side, lock open, outside, no spouts, remaining two pairs, ebony doors, open inwards, middle pair, low drains, inner pair, drains, low water level, elevated threshold, provided, middle ebb doors, well, lock side, inner ebb doors, sides, corridor runs, outer harbor, corridors, two underground doors, capstans upstairs, middle doors, drain locks, serve, keep, harbor, depth together, underground passages, sewers, draining, 1, 50 scale, scale, Rijkswerf Vlissingen, 1849, wood, plant material, brass, alloy, rope
Image ID:
The watermark in the image will not appear on the final download.