Model of a Made Mast, Round mast with square top, ears, longitudinal and side shells. The mast base is quite square and consists of eight parts: the square mast king, unlike other masts, is placed diagonally, so with the corners facing the sides of the mast, so that the cheeks are triangular in cross-section, their outside is rounded. From the mast hole, three cheeks have been added at the rear that run all the way up, while the front three parts stop just above the longitudinal drops, from this point the mast thus consists of eight parts again and becomes square again. The parts are held together with a large number of bucket tires. Two side shells reinforce the whole, they also support the longitudinal cuts together with the ears, which are fastened with irons and bolts not against the sides but against the front of the mast. A riding bed is fitted between the ears. At the mast hole there are two notches for the ears and two for the longitudinal sowing if the mast is turned., anonymous, c. 1821, wood (plant material), brass (alloy), h 144.5 cm × l 18.9 cm × w 5.2 cm
Keywords:
Model, Mast, Round mast, square top, ears, longitudinal, side shells, mast base, quite square, consists, eight parts, square mast king, masts, placed diagonally, corners facing, sides, mast, cheeks, triangular, cross-section, outside, rounded, mast hole, three cheeks, added, rear, run, way up, front three parts stop, longitudinal drops, point, mast thus consists, eight parts again, becomes square again, parts, held together, large number, bucket tires, Two side shells reinforce, whole, support, longitudinal cuts together, fastened, irons, bolts, front, riding bed, fitted, two notches, two, longitudinal sowing if, turned, c, 1821, wood, plant material, brass, alloy
Image ID:
The watermark in the image will not appear on the final download.